Item Name: PVC Elbow 90°
Description: PVC Pipe Fitting Elbow 90°
Material: 100% Virgin PVC
|Item Name||PVC Elbow 90°|
|Description||PVC Pipe Fitting Elbow 90°|
|Material||100% Virgin PVC|
|Key Word||PVC Pipe，PVC Pipe Fittings, PVC Elbow，|
|Color||Grey or Black or Blue|
|Standard||BS EN ISO1452,ISO4422,DIN8063,GB/T1002.2|
PVC pipes,pipe fittings and valves is widely used in water supply,chemical industry,water treatment,enviromental protection,pharmaceutical area etc.
It has following advantages:
The weight per unit is only 1/6 of the cast-iron pipes, so the transport is quite convenient.
The strength can get to 45mpa
The internal surface of the pipe is smooth with no dirt and no blockage. The loss is 30% lower than that of the cast-iron pipes.
It has good quality of high acid resistance, alkali resistance, chemicals resistance and electrochemistry resistance, so the point of corrosion will not occur during the use.
It adopts the glue and soft joining. Therefore, the installation is quite easy and sealing is reliable.
Long service life
The service time can reach more than 50 years under the normal working pressure.
The cost of transport and installation is low, and the total engineering cost is 30-40% lower than of the cast-iron pipes.
Non-toxic and sanitation
The product conforms to the standards of the drink water and water transported has no second pollution.
Changzhou Xita Plastic Co., Ltd is a professional supplier of UPVC/CPVC/PE/PPR Pipes, pipe fittings, valves. Plastic piping systems such as pipes, fittings and valves is widely used in water supply, chemical industry, water treatment, environmental protection, pharmaceutical area etc.
We insist in the principal of ""Quality First, Clients First". Your satisfaction is our eternal pursuit. We Strictly follows ISO9001 quality system to arrange manufacturing. With high-class raw material, strict quality control in both the workshop and laboratory with various professional testing equipment, Xita Plastic ensures that every single product meets the corresponding inspection standard.
We could provide products as follows:
1. PVC pipe fittings-Cement PN10: 20mm~400mm
2. PVC pipe fittings-rubber ring fittings PN10: 63mm~355mm
3. PVC pipe fittings-Cement PN16: DN15~DN200
4. PVC Valves: Ball valves, true union valves, butterfly valves, check valves, bottom valves, Y strainers
5. PPR pipe fittings
6. PE pipe and fittings
7. Distribution: Drier for injecion machines; PVC/PE foam tapes for sealing; PET tapes
Our sales staff is experienced in plastic piping area for 9 years. We will give you suggestions for your better choice.
"Xita Plastic" warmly welcomes friends and clients all over the world for further cooperation.